18HP 2 Stroke Outboard Motor Boat Engine Gas Powered Long Shaft Water Cooling US

HANGKAI 2 Stroke Outboard Motor 18 HP Boat Engine Water Cooled System Long Shaft. Outboard Motor Gas Powered Boat Engine Long Shaft Water Cooling. Our machines are all without gear oil versions. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period.

Our outboard motor doesn't with oil of gear, please prepare it by yourself. Speed change and constant speed cruise function make it easy for you to adjust the running speed and stable navigation at a constant speed to bring you a more comfortable user experience. The manual start function allows you to operate easily by pulling th. Opening the speed switch on the handle. Handle(20 inches in length) is easy to grasp. The red stop button allows you to stop the engine by pressing it for a few seconds. We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible.

The three-blades propeller with a streamlined design provides you with greater power. The silencer cover can absorb the noise generated by the fan through the internal sound-absorbing material, thus providing a quieter working environment. Plate can effectively reduce the turbulence of the waves and avoid water-wetting clothes.

It is widely used in fishery, aquaculture, outdoor exploration, etc. There is a screw on the gearbox, unscrew the screw to add gear oil. Gear oil is not filled before each machine leaves the factory, so please fill gear oil when using for the first time. After that, add according to personal use, and check every ten hours.

Model: 18HP Horsepower Long Axis. Gear Ratio: 2.08 (27:13). Refueling Method: 92 Unleaded Gasoline is Recommended.

Oil Tank Capacity: 24L/6.34gal. Propeller Specification: 23.5cm/9.25in (Length) 20.3cm/8in (Diameter).

Suitable Stern Plate Height: 45cm-55cm/17.721.7in. Cylinder Diameter Stroke: 56mm/2.2in50mm/2in. Recommended Engine Oil: 2 Stroke Engine Oil. Mixing Ratio: Fuel: Oil = 50:1. Trim and Tilt System: Manual Tilt.

Package Size: 1337138.5cm/52.42815.2in. Product Size: 87.333.2105.3cm/34.413.141.5in.

The two-stroke outboard must use a mixture of No. 92 gasoline and two-stroke engine oil.

The volume ratio of gasoline and oil during the running-in period of the new machine is 25:1. After the running-in period, the volume ratio of gasoline and oil is 50:1. Special attention: gasoline and engine oil must be pre-mixed and stirred evenly, and then poured into the fuel tank. The outboard motor must be started in water, do not start the engine on shore. Loosen the vent screw on the fuel tank cover counterclockwise when starting. When the outboard motor is started, the emergency flameout rope should be inserted, and the other end should be placed on the wrist or belt. The running-in period is about 10 hours or a month, and during the running-in period, do not drive with a high accelerator.

Replace the gear oil after the running-in period, and the second replacement time is after 100 hours or about six months. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Note:Our machines are all without gear oil versions. Feedback is very important to us.

It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business.

A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. Made of high quality material, Durable. 92 Unleaded Gasoline is Recommended. Fuel: Oil = 50:1.